[Syrupmakers] Rebuild of a Chattnooga no. 12 cane mill

[Charles Graf]

i GOT BRASS BEARING MATERIAL AT  RELIABLE BRONSE  STANCHFIELD  MN.  1 800 445 4374.  tHE SALESMAN WAS VERY HELPFULL.    CHARLES
  ----- Original Message ----- 
  From: Gene Crouse 
  To: Richard Harrison ; A list for sorghum and cane syrupmakers 
  Sent: Friday, December 05, 2014 3:59 PM
  Subject: Re: [Syrupmakers] Rebuild of a Chattnooga no. 12 cane mill


  You can also have bearings machined out of Delrin which is an oil impregnated plastic I was leery of those at first but they seem to work really well


  Richard Harrison <rharrison922 at yahoo.com> wrote:


  Jerry,
       They have to be trimmed to fit at a machine shop, usually. Not too expensive. Lasts a LONG time. Not so hazardous as lead.
                       Richard
  It is really more of a sleeve, I guess. 


------------------------------------------------------------------------------
  From: Jerry Jolley <jejolley at twlakes.net>
  To: 'Richard Harrison' <rharrison922 at yahoo.com>; 'A list for sorghum and cane syrupmakers' <syrupmakers at syrupmakers.net> 
  Sent: Friday, December 5, 2014 2:41 PM
  Subject: RE: [Syrupmakers] Rebuild of a Chattnooga no. 12 cane mill



  Where can one purchase the brass bearings or are they just a standard size?

  Jerry Jolley




  From: Syrupmakers [mailto:syrupmakers-bounces at syrupmakers.net] On Behalf Of Richard Harrison
  Sent: Friday, December 05, 2014 1:44 PM
  To: A list for sorghum and cane syrupmakers
  Subject: Re: [Syrupmakers] Rebuild of a Chattnooga no. 12 cane mill

  Claude,
       You can also use brass bearings instead of babbit.
                       Richard
    

------------------------------------------------------------------------------

  From: Steven Ball <stevendball at gmail.com>
  To: A list for sorghum and cane syrupmakers <syrupmakers at syrupmakers.net> 
  Sent: Friday, December 5, 2014 11:52 AM
  Subject: Re: [Syrupmakers] Rebuild of a Chattnooga no. 12 cane mill

  I went to a local nut and bolt warehouse and replaced all hardware with new including set bolts. I also sand blasted everything and primed and painted parts. I used food grade grease for the gears. There's a place in NC you can order lead free Babbitt to pore the barrings. Other then that these mills are very simple and don't have to many parts.

  Have Fun!! If you need anything let me know!!
  Sincerely,
  Steven 
  On Fri, Dec 5, 2014 at 8:56 AM, Claude Richbourg <iamgardenman at gmail.com> wrote:



  Hello all,
  I am new to the list and have been growing cane to make syrup for the last two years, (on a a small scale for myself).
  Other people have milled my cane for me the last two years. But, I just bought a cane mill for myself and it is in good shape.

  No cracks or welds and all the pieces are there except the two roller caps on the top plate. I guess I will have to get those made by a local blacksmith.
  Anyway, I was wanting to know if there is anyone near to the Tallahassee area that could provide me with some guidance on how the cane mill should be refurbished. I have started taking it apart and it all looks good. So, I may need assistance with that or maybe parts. I plan on cleaning the outer parts and repainting them back to the old redish color?
  Thanks up front and I would appreciate any and all advice on this rebuild.
  Best Regards,
  Claude

  _______________________________________________
  Syrupmakers mailing list
  Syrupmakers at syrupmakers.net
  http://syrupmakers.net/mailman/listinfo/syrupmakers_syrupmakers.net


  _______________________________________________
  Syrupmakers mailing list
  Syrupmakers at syrupmakers.net
  http://syrupmakers.net/mailman/listinfo/syrupmakers_syrupmakers.net






------------------------------------------------------------------------------


  _______________________________________________
  Syrupmakers mailing list
  Syrupmakers at syrupmakers.net
  http://syrupmakers.net/mailman/listinfo/syrupmakers_syrupmakers.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://syrupmakers.net/pipermail/syrupmakers_syrupmakers.net/attachments/20141205/9427cd7d/attachment-0001.html>